1# gridfinity-rebuilt-constants
 2
 3This file contains dimensions that are critical to the constructiuon of the other models, but are not values that often need to be changed. Thus, they were outsourced to this file such that the rest of the files would retain parity. All values here have the same range, this is positive real numbers. Some can be zero, but that may result in strange or invalid geometry,
 4
 5Parameter | Description
 6--- | ------
 7h_base | height of the base
 8r_base| outside rounded radius of bin
 9r_c1 | lower base chamfer "radius"
10r_c2 | upper base chamfer "radius"
11h_bot| bottom thiccness of bin
12r_fo1| outside radii 1
13r_fo2| outside radii 2
14r_fo3 | outside radii 3
15r_hole1| screw hole radius
16r_hole2| magnet hole radius
17d_hole| center-to-center distance between holes
18h_hole| magnet hole depth
19h_slit| slit depth (printer layer height)
20r_f1| top edge fillet radius
21r_f2 | internal fillet radius
22d_div | width of divider between compartments
23d_wall| minimum wall thickness
24d_clear| tolerance fit factor
25d_tabh| height of tab (yaxis, measured from inner wall)
26d_tabw| maximum width of tab
27a_tab| angle of tab
28bp_h_bot| Baseplate bottom part height (part added with weigthed=true)
29bp_cut_size| Baseplate bottom cutout rectangle size
30bp_cut_depth| Baseplate bottom cutout rectangle depth
31bp_rcut_width| Baseplate bottom cutout finger gap width
32bp_rcut_length| Baseplate bottom cutout finger gap left
33bp_rcut_depth| Baseplate bottom cutout finger gap depth
34d_cs | countersink diameter for baseplate
35r_skel| radius of cutout for skeletonized baseplate
36r_cb| baseplate counterbore radius
37h_cb| baseplate counterbore depth
38h_skel | minimum baseplate thickness (when skeletonized)